Application
Application
1999 – 2005 | Volvo | C70 Turbo |
1999 – 2009 | Volvo | S60 Turbo |
1999 – 2000 | Volvo | S70 Turbo |
1999 – 2006 | Volvo | S80 Turbo |
1999 – 2006 | Volvo | S80 Non-Turbo |
1999 – 2007 | Volvo | V70 Turbo |
1999 – 2007 | Volvo | XC70 Turbo |
2003 – 2007 | Volvo | XC90 Turbo |
What you need to know (please read before ordering)
What you need to know (please read before ordering)
Important: If your vehicle isn’t starting whether permanently or intermittently, we require your CEM, ECM, and at least one key so we can test the immobilizer sequence (not applicable for vehicles without a Central Electronic Module). When ordering, please tell us that you’ll be sending in the additional modules so we can make sure the shipping labels properly list everything.
This is a Program Transfer Service of your original module to a good unit you’ve supplied. You will need to source out a good used matching unit, then send them both in here for the cloning procedure. Only the good unit will be shipped back to you. The original module is recycled here at our facility.
To ensure a matching unit, match up the module’s Hardware Part Number (HW-PN). See the pictures for an example.
The order will be processed during our regular business hours (Mon-Fri 8:30 – 5:00 EST). After processing your order, we will email shipping labels and shipping instructions. If you don’t see shipping labels within 1 hour of submitting your order (during business hours) please first check your junk/spam folders. If you still don’t see the labels, please contact us at 1-888-712-2525
Background Information: The immobilizer system in P2 Platform Volvos is integrated into the Key, CEM, and ECM. Each of these modules contain an immobilizer encryption code. Engine start will only be permitted when the security code is matching in both modules. Whenever any of these modules is replaced with a used or remanufactured part, the encryption code and the software must be transferred to the used module. This operation is only possible at our facility because the dealer’s VIDA tool can only program the encryption code in a new part.
Features:
Plug & Play: The programming from the original unit is moved over to the good used unit one for one, which means the module sent back to you is plug and play. No software reload or calibration is required.*
Quick Turnaround: Your module will be tested, cloned, tested again, and the good unit sent back to you in the same day (unless otherwise noted).
Quality Tested: All our Volvo ECMs undergo rigorous tests on our specialized custom-built CAN-bus driven test bed. Functions, DTCs, and software are checked and verified for proper operation.*
Lifetime Limited Warranty on the Software Transfer: This module comes with our Lifetime Limited Warranty on the Software Transfer. Please see here for more information.
*Please note in some very rare cases of software corruption there may be need for a software reload. We see this in less than 1 percent of all modules sent in.
*Please note that since this is an Engine Control Module some functions can only be tested when installed in the vehicle with a working engine, meaning testing is limited outside of the vehicle. If you’re in doubt of whether or not your ECM is faulty, please consult with a Volvo specialist or contact our tech support by submitting a Technical Question Form here.
Reference Numbers
Reference Numbers
0261204559 | 0261206272 | 0261206828 | 0261206829 | 0261207227 | 0261207392 | 0261207666 | 0261207712 | 0261207809 | 9486129 | 1275781 | 9470738 | 8627456 | 8627455 | 8627454 | 8670169 | 8627757 | 8675155 | 8675760 | 8675761 | 0261208289 | 0261208290 | 30668478 | 30668479 | 8602779 | 8603115 | 8602253 | 8675761 | 30668478 | 8627454 | 8670169 | 30668479 | 8627455 | 8675760
How This Service Works
How This Service Works
Step 1: Purchase a good used unit with matching part number from a local scrap yard.
Step 2: Purchase our service online or over the phone.
Step 3: After processing your order, we will email you pre-paid shipping labels.
Step 4: Send us your old defective unit by dropping off the package to any UPS location, or call UPS to schedule a pick up.
Step 5: We will extract the software from the old unit, and program the good used unit with the extracted software.
Step 6: We will send you back the good module the same day (unless otherwise stated), and recycle your old defective unit at our facility.
Step 7: You install the unit back into your vehicle.
For more detailed instructions, please see here.
FAQ
FAQ
Do you know where I can source a matching module?
A good source for used Volvo parts is Erie Vo-vo Inc if you’re on the East coast, and Volvo and Saab Dismantlers if on the West coast.
The scrap yard doesn’t have my module’s part number in stock, but they carry a similar module with a different part number. Can I send you that one?
No. The software in your module is hardware specific. The good used module must have a matching part number, or else we cannot perform this service.
Why don’t you send my original module back to me?
In order to extract the software, we have to do some hardware modifications to your original module. This process is irreversible and damages the module permanently. Your unit will be recycled at our facility.
Why is there no Lifetime Warranty on Cloned units?
We offer a Lifetime Warranty on the Software only. We also test your used module before and after the transfer to make sure it is fully operational. Since it is a used part that you purchased elsewhere and we did not repair or recondition it, we do not extend the warranty to the hardware. Check with your scrap yard for their warranty terms on your module.
How long does it take for you to clone my module?
We have same-day turnaround. This means that this service will be performed and the module shipped back out the same day we receive it.