Application

What you need to know (please read before ordering)

This is a Repair Service of your existing MK100 hydraulic block. You will need to remove the ABS module, block, and pump, and send it to us for repair using the shipping labels provided to you.

Important: When shipping your ABS module, block, and pump please ensure you package it properly. Place the parts in a thick plastic bag to prevent fluid from leaking into the packaging. If the fluid leaks and saturates the box, this will cause the box to break and could cause delays or even possible loss of the module when shipping into our facility. Because the part is heavy, we recommend packaging with lots of protection (bubble wrap, packaging peanuts, etc) to avoid any movement in the box. Not following these instructions could result in additional fees, damages, or even loss of the part. It is the sole responsibility of the shipper if any of these events occur when sending the part to XeMODeX.

The order will be processed during our regular business hours (Mon-Fri 8:30 – 5:00 EST). After processing your order, we will email shipping labels and shipping instructions. If you don’t see shipping labels within 1 hour of submitting your order (during business hours) please first check your junk/spam folders. If you still don’t see the labels, please contact us at 1-888-712-2525

This repair service is primarily focused on the common hydraulic block problems. Problems with the module or pump can be addressed, but additional time and cost may be required.

Features:

Plug & Play: The software and settings will not be modified, making this module plug and play. No software reload or calibration is required after installation.

Quick Turnaround: Your module will be tested, repaired, tested again, and sent back to you in 1 – 2 Business days (unless otherwise noted).

Quality Tested: Our cutting-edge test bench thoroughly tests the function of the hydraulic block, so you can have assurance that the part will be functioning properly after our service.

5 Year Limited Warranty: This module comes with our 5 Year Limited Warranty. Please see here for more information. Please see here for more information.

Reference Numbers

D2BZ-2C405-B | D2BZ-2C405-C | D2BZ-2C405-D | D2BZ-2C405-E | F2GZ-2C215-A | F2GZ-2C215-B | FR3Z-2C215-B | G1FZ-2C405-A | G1FZ-2C405-B | GR3Z-2C215-B | GR3Z-2C215-D | GV6Z-2C405-A | GV6Z-2C405-B | GV6Z-2C405-C | GV6Z-2C405-D | GV6Z-2C405-F | GV6Z-2C405-G | JR3Z-2C215-A | K2GZ-2C286-B | KV6Z-2B373-A | KV6Z-2B373-B | KV6Z-2B373-D | LX6Z-2B373-A | LX6Z-2B373-C | LX6Z-2B373-G | LX6Z-2B373-H | LX6Z-2B373-J | LX6Z-2B373-K | LX6Z-2B373-L | LX6Z-2B373-M

Please note: This is not an extensive list. If you don’t see your part number listed, we’ll still be able to repair it as long as it’s from a MK100 unit.

Common Failure Symptoms

• Wheels remain locked after applying the brakes
• Left front and right rear brake calipers remain engaged after brake pedal is released
• Right front and left rear brake calipers remain engaged after brake pedal is released
• No brake fluid pressure going to one or more calipers
• Soft, spongey brake pedal
• Other faults can be addressed on a case-by-case basis

How This Service Works

Step 1: Purchase our service online or over the phone.
Step 2: After processing your order, we will email you pre-paid shipping labels.
Step 3: Send us your old defective unit by dropping off the package to any UPS location or call UPS to schedule a pick- up.
Step 4: We will inspect and repair your old module.
Step 5: We will send you back the repaired module the same day (unless otherwise stated).
Step 6: You install the unit back into your vehicle.

For more detailed instructions, please see here.