Application

What you need to know (please read before ordering)

Please Note: The ABS hydraulic block has internal brake pressure sensors built in. In order for us to fully test your ABS module, we will also need the attached hydraulic block and pump.

Important: When shipping your ABS module and Pump please ensure you package them properly. Place the module and pump together in a thick plastic bag to prevent fluid from leaking into the packaging. If the fluid leaks and saturates the box, this will cause the box to break and could cause delays or even possible loss of the module when shipping into our facility. Because the part is heavy, we recommend packaging with lots of protection (bubble wrap, packaging peanuts, etc) to avoid any movement in the box. Not following these instructions could result in additional fees, damages, or even loss of the part. It is the sole responsibility of the shipper if any of these events occur when sending the part to XeMODeX.

Please Note: This repair service is for the ABS module only. Repairs to the hydraulic block and pump are not included. If your pump also needs to be repaired, please see our ABS and Pump repair service here. https://xemodex.ca/ca/product/abs-module-and-pump-assembley-repair-return-for-3-series-e90/

This is a Repair service of your existing module. You will need to remove and send your module to us for repair using the shipping labels provided to you.

The order will be processed during our regular business hours (Mon-Fri 8:30 – 5:00 EST). After processing your order, we will email shipping labels and shipping instructions. If you don’t see shipping labels within 1 hour of submitting your order (during business hours) please first check your junk/spam folders. If you still don’t see the labels, please contact us at 1-888-712-2525

Features:

Plug & Play: The software and settings will not be modified, making this module plug and play. No software reload or calibration is required after installation.

Quick Turnaround: Your module will be tested, repaired, tested again, and sent back to you in the same day (unless otherwise noted).

Completely Reworked PCB: All internal circuit boards are tested at the component level. Any known prone-to-failure parts that are close to the maximum tolerance are automatically replaced.

Quality Tested: All our ABS modules undergo rigorous tests on our specialized custom-built CAN-bus driven testbed. All functions, DTCs, and software are checked and verified for proper operation.

Lifetime Limited Warranty: This module comes with our Lifetime Limited Warranty. Please see here for more information.

Reference Numbers

3452 677607-01 | 34-50-6-777-160 | 34-50-6-777-161 | 34-506-784-182 | 34-51-6-777-165 | and more

Common Failure Symptoms

• Wheel speed sensor codes
• Brake pressure sensor codes
• 5DF0 “Hydraulic Pump Motor”
• 5DF1 “Hydraulic Pump Motor”

How This Service Works

Step 1: Purchase our repair service online or over the phone.
Step 2: After processing your order, we will email you pre-paid shipping labels.
Step 3: Send us your old defective unit by dropping off the package to any UPS location, or call UPS to schedule a pick up.
Step 4: We will inspect and repair your old module.
Step 5: We will send you back the repaired module the same day (unless otherwise stated).
Step 6: You install the unit back into your vehicle.

For more detailed instructions, please see here.