Application

Acura models equipped with the 38 pin Bosch 9.0 ABS

What you need to know (please read before ordering)

This is a Repair Service of your existing module. You will need to remove and send your module to us for repair using the shipping labels provided to you.

The order will be processed during our regular business hours (Mon-Fri 8:30 – 5:00 EST). After processing your order, we will email shipping labels and shipping instructions. If you don’t see shipping labels within 1 hour of submitting your order (during business hours) please first check your junk/spam folders. If you still don’t see the labels, please contact us at 1-888-712-2525

Features:

Plug & Play: The software and settings will not be modified, making this module plug and play. No software reload or calibration is required after installation.

Quick Turnaround: Your module will be tested, repaired, tested again, and sent back to you in the same day (unless otherwise noted).

Completely Reworked PCB: All internal circuit boards are tested at the component level. Any known prone-to-failure parts that are close to the maximum tolerance are automatically replaced.

Quality Tested: All our ABS modules undergo rigorous tests on our specialized custom built CAN-bus driven test bed. All functions, DTCs, and software are checked and verified for proper operation.

2 Year Limited Warranty: This module comes with our 2 Year Limited Warranty. Please see here for more information.

Reference Numbers

57111-TX4-A02 | 57111-TX4-A03 | 57111-TX4-A11 | 57111-TX4-A21 | 57111-TX5-A02 | 57111-TX5-A03 | 57111-TX5-A11 | 57111-TX5-A21 And More

Common Failure Symptoms

• No communication with ABS module
• ABS warning lights are on
• Wheel speed sensor codes
• ABS solenoid codes
• Hydraulic valves codes
• MIL requested by ABS module

How This Service Works

Step 1: Purchase our service online or over the phone.
Step 2: After processing your order, we will email you pre-paid shipping labels.
Step 3: Send us your old defective unit by dropping off the package to any UPS location or call UPS to schedule a pick- up.
Step 4: We will inspect and repair your old module.
Step 5: We will send you back the repaired module the same day (unless otherwise stated).
Step 6: You install the unit back into your vehicle.

For more detailed instructions, please see here.

FAQ

Can all types of failures be fixed?

We strive to achieve a 100% repair success rate, but the reality is some modules are damaged beyond repair. Water and fire-damaged units are very difficult to revive. In these cases it may be possible to transfer the software to a matching donor unit, which will allow the donor unit to work properly in the vehicle. It that is not possible, we’ll refund the repair service costs less a $75 diagnostic bench test fee.

Technical Resources

Check out our blog here for more information