Application

What you need to know (please read before ordering)

Important: Our remanufacturing process resolves issues with codes that will not clear even after the pump and fluid was replaced, communication problems and water damage related failures and related codes stored in the DEM.

Before ordering this repair service you must:
• Replace the Haldex AOC fluid
• Replace the Haldex AOC filter
• Replace the Haldex AOC feed pump
The freshly rebuilt DEM may be instantly destroyed if you fail to replace the above-mentioned parts.

This is a Repair service of your existing module. You will need to remove and send your module to us for repair using the shipping labels provided to you.

The order will be processed during our regular business hours (Mon-Fri 8:30 – 5:00 EST). After processing your order, we will email shipping labels and shipping instructions. If you don’t see shipping labels within 1 hour of submitting your order (during business hours) please first check your junk/spam folders. If you still don’t see the labels, please contact us at 1-888-712-2525

Features:

Plug & Play: The software and settings will not be modified, making this module plug and play. No software reload or calibration is required after installation.

Quick Turnaround: Your module will be tested, repaired, tested again, and sent back to you in the same day (unless otherwise noted).

Completely Reworked PCB: All internal circuit boards are tested at the component level. Any known prone-to-failure parts that are close to the maximum tolerance are automatically replaced.

Quality Tested: All our DEMs undergo rigorous tests on our specialized custom built CAN-bus driven test bed. All functions, DTCs, and software are checked and verified for proper operation.

Lifetime Limited Warranty: This module comes with our Lifetime Limited Warranty. Please see here for more information.

Reference Numbers

7F9Z4C016B | 7F9Z-4C016-A | 5F9Z-4C016-AB | 6F9Z-4C016-A

Common Failure Symptoms

• Communication issues with DEM
• Water damage
• All Wheel Drive not working

How This Service Works

Step 1: Purchase our repair service online or over the phone.
Step 2: After processing your order, we will email you pre-paid shipping labels.
Step 3: Send us your old defective unit by dropping off the package to any UPS location, or call UPS to schedule a pick up.
Step 4: We will inspect and repair your old module.
Step 5: We will send you back the repaired module the same day (unless otherwise stated).
Step 6: You install the unit back into your vehicle.

For more detailed instructions, please see here.