Application
Application
For BMW: F01, F02 Platform. With ZF 6HP26Z Automatic Transmission
2009-2012 | BMW | 750i |
2010-2012 | BMW | 750Ix |
2009-2012 | BMW | 750Li |
2010-2012 | BMW | 750LiX |
2010-2012 | BMW | Alpina B7 |
2010-2012 | BMW | Alpina B7L |
2011-2012 | BMW | Alpina B7X |
2011-2012 | BMW | Alpina B7LX |
What you need to know (please read before ordering)
What you need to know (please read before ordering)
This is a Repair Service for your existing module. You will need to remove and send your module to us for repair using the shipping labels provided to you.
The order will be processed during our regular business hours (Mon-Fri 8:30 – 5:00 EST). After processing your order, we will email shipping labels and shipping instructions. If you do not see shipping labels within 1 hour of submitting your order (during business hours) please first check your junk/spam folders. If you still do not see the labels, please contact us at 1-888-712-2525
Features
Plug & Play: The software and settings will not be modified, making this module plug and play. No software reload or calibration is required after installation.
Quick Turnaround: Your module will be tested, repaired, tested again, and sent back to you on the same day (unless otherwise noted).
Quality Tested: All Mechatronics modules undergo rigorous tests on our specialized custom-built CAN-bus driven testbed. All functions, DTCs, and software are checked and verified for proper operation.
Lifetime Limited Warranty: This module comes with our Lifetime Limited Warranty. Please see here for more information.
Reference Numbers
Reference Numbers
106819842602 | 1068198426 | 1068 198 426 809 | 1068198426809 | 24347588728 | 24-34-9-456-098
Common Failure Symptoms
Common Failure Symptoms
Currently, our Mechatronics repair service is limited to the following diagnostic trouble codes:
• DTC 40625 (P0716) Turbine speed sensor, value too small
• DTC 40626 (P07BF) Turbine speed sensor, short to ground or open circuit.
Please Note*
Please separate the black plastic Mechatronics control unit from the valve body and send it the Mechatronics unit only (without the valve body)
How This Service Works
How This Service Works
Step 1: Purchase our service online or over the phone.
Step 2: After processing your order, we will email you pre-paid shipping labels.
Step 3: Send us your old defective unit by dropping off the package at any UPS location, or call UPS to schedule a pick- up.
Step 4: We will inspect and repair your old module.
Step 5: We will send you back the repaired module the same day (unless otherwise stated).
Step 6: You install the unit back into your vehicle.
For more detailed instructions, please see here.